
3 products
Getting in and out of a spa comfortably and safely is something most buyers think about after they have the spa installed rather than before. If your spa sits 85 to 91 cm above ground — which most standard spa pools do — stepping over the cabinet edge without steps is awkward at best and genuinely difficult for children, older users, or anyone with limited mobility. Spa steps solve this simply and make daily use much easier.
We carry the Eterna Steps in three configurations to suit different spa heights and access needs. All models are in black with slip-resistant treads and assemble quickly without tools.
The most compact option. Suitable for lower spa cabinets or situations where a small height boost is all that is needed. A practical starting point for most standard spa pools.
Width: 760mm | Height: 570mm | Depth: 680mm | Handle height: 1300mm
The most popular option for standard spa pools in the 85 to 91 cm cabinet height range. The 3 tier model includes a handle at 1300mm height, which provides a stable grip point for entry and exit. Large slip-resistant treads on each step and assembles together in seconds. Suits most spa pool models in our range.
For taller spa cabinets or swim spas with a higher deck height. The additional tier provides more gradual steps for easier access on units that sit higher off the ground.
The right number of tiers depends on your spa's cabinet height. As a general guide:
The 2 tier suits lower spa models or situations where users mainly need a small step up rather than a full climb.
The 3 tier is the right choice for most standard spa pools with a cabinet height around 85 to 91 cm. This covers the majority of models in our range including the Family, Jamaica, Fiji, Paris, and similar.
The 4 tier suits swim spas or any model with a higher cabinet, where a 3 tier would not provide enough height coverage for comfortable entry.
If you are not sure, check your spa model's cabinet height in the product specifications, or call 1300 185 338 and we can advise on the right step configuration.
A spa area is always wet. Even with the cover on, condensation, splashing, and general moisture around the spa cabinet means the surfaces around your spa get slippery. Slip-resistant treads on each step are not just a comfort feature — they are a safety requirement in a wet outdoor environment, particularly for children and older users. All three Eterna models have slip-resistant treads designed for outdoor wet conditions.
The 3 Tier Eterna Steps suits most standard spa pools in our range with a cabinet height of 85 to 91 cm. It includes a handle at 1300mm, large slip-resistant treads, and assembles in seconds. If you are unsure, call 1300 185 338 with your spa model and we can confirm.
The Eterna Steps are freestanding. They sit flush against the spa cabinet without needing to be bolted to the spa or the ground. This means they can be repositioned easily if needed.
Yes. The Eterna Steps are built for outdoor use and designed to handle Australian weather conditions including UV exposure, rain, and temperature variation.
Warranty terms are listed on each individual product page. Call 1300 185 338 if you have questions before purchasing.
Yes. The Eterna Steps are freestanding and sized to suit most standard spa pools regardless of brand. Check the dimensions of the 3 Tier model against your spa cabinet height to confirm suitability before ordering.
Factory-Direct Spas, Designed for Australian Outdoor Living.
We cut out the middlemen so you enjoy more jets, more features and better value.
Mon-Fri:9am - 9pm
Sat-Sun:9am - 3pm
