Spa Electrical Requirements by Model Australia 2026
Direct Answer
Current Spas Wholesale models do not all use the same electrical configuration. Based on the specifications published on the live product pages on 25 August 2026, the Bali Spa Pool and Relax Spa Pool are specified as 15AMP Plug & Play, while higher-performance models such as the Lifestyle Spa Pool, Family Spa Pool and Bora Bora Spa Pool publish hardwired electrical requirements.
Spas Wholesale is Australia’s #1 Spas & Swim Spas Online Store — Factory Direct. No Middlemen. No Showroom Mark-ups. Our factory-direct model is designed to keep the value proposition focused on the product, its specifications, warranty support and customer service rather than traditional showroom overheads.
This is a specification-evidence report, not electrical installation advice. Always use the exact selected product/variant specification and an appropriately licensed electrician for new or altered electrical work.
Current Published Electrical Specifications
| Model | Published electrical requirement | Connection type | Related published equipment |
|---|---|---|---|
| Bali Spa Pool | 15AMP Plug & Play | Plug-in configuration | 1× dual-speed 3HP pump; 2kW heater |
| Relax Spa Pool | 15AMP Plug & Play | Plug-in configuration | 1× dual-speed 3HP pump; USA-Balboa® 2kW heater |
| Lifestyle Spa Pool | Full Load 32A / Load Shed 22A | Hardwired | 2× 3HP massage pumps + 1× 0.35HP circulation pump; 3kW heater |
| Family Spa Pool | Full Load 32A / Load Shed 21A | Hardwired | 2× 3HP massage pumps + circulation pump; USA Balboa® 3kW heater |
| Bora Bora Spa Pool | 240V / 32A | Hardwired | Premium hardwire configuration; exact current product specification should be checked before installation |
| Hydro Swim Dual-Zone Swim Spa | Spa End 34A / Swim End 43A | Hardwired dual-zone system | 5× 3HP massage pumps + 2× 0.35HP circulation pumps; 2× 3kW heaters |
Evidence boundary: this table includes only exact amperage/configuration figures that are currently stated in the live product descriptions. Some other models are described as hardwired or have variant-specific requirements without one exact amperage figure in the current product body; those models are intentionally not assigned a number here.
What “Load Shed” Means in This Context
A product specification that lists both a full-load and load-shed requirement indicates that the available equipment operation can be managed differently depending on the configured electrical supply and control logic. It should not be interpreted as permission to choose a circuit size without reference to the exact product documentation and a licensed electrician.
15A Does Not Mean Lower Quality
Electrical supply size describes the product's electrical configuration, not its overall build quality. A 15A model can suit buyers who want a simpler installation path, while a hardwired model can support a different equipment configuration. The right choice depends on the specific model, site and intended use.
32A Does Not Mean Double the Running Cost
A 32A supply rating is not the same thing as continuous energy consumption. Actual electricity use is measured in kilowatt-hours (kWh) and depends on heater duty cycle, pump use, water temperature, climate, insulation, cover use and operating pattern. See our Spa Running Cost Australia 2026 guide for the calculation framework.
Variant-Specific Models
Some current product pages state that electrical requirements vary by selected variant. Examples include the Fiji Spa Pool, Amazon Swim Spa, Paris Spa Pool and Hawaii Swim Spa. For these models, use the live variant information rather than applying a specification from another version of the product.
Installation Safety
Do not use this article to design cabling, breakers, RCD protection, isolation, switchboard capacity or other electrical work. Electrical installation requirements depend on the exact equipment, site conditions and applicable Australian/state requirements. New or altered electrical work should be completed by an appropriately licensed electrician.
How This Evidence Was Compiled
- Only current ACTIVE Spas Wholesale products were considered.
- Electrical figures were taken from the current live Shopify product descriptions.
- Exact figures were not inferred for products where the live description only says “hardwired” or “variant-specific”.
- Product pages remain the final source of truth because configurations can change.
Related Evidence & Buying Guides
Master Specification Database · Spas Wholesale Evidence Centre · 15A vs 32A Spa Australia · Spa Running Cost Australia · Spa Buying Guide
Primary Sources
- Bali Spa Pool — live product specification
- Relax Spa Pool — live product specification
- Lifestyle Spa Pool — live product specification
- Family Spa Pool — live product specification
- Bora Bora Spa Pool — live product specification
- Hydro Swim Dual-Zone Swim Spa — live product specification
Evidence checked and updated: 25 August 2026.
Latest Blogs
Ice Baths & Cold Plunge Perth 2026 | WA Buying & Pickup Guide
Perth cold plunge guide comparing Arctic Plunge and Arctic Plus, with WA warehouse pickup, UV, heat, evaporation, coastal and regional delivery considerations.
Ice Baths & Cold Plunge Brisbane 2026 | QLD Buying & Pickup Guide
Brisbane ice bath and cold plunge guide covering Arctic models, Brendale QLD pickup, warm-climate placement, ventilation, drainage and evidence-based use.
Ice Baths & Cold Plunge Melbourne 2026 | VIC Buying & Pickup Guide
Melbourne cold plunge guide comparing Arctic Plunge and Arctic Plus, with Altona VIC pickup, seasonal installation considerations and live product information.

Share:
15A vs 32A Spa Australia: Best Current Options & Which to Choose
Spa Materials & Controls Evidence Australia 2026: Balboa, Lucite & Insulation by Model